BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Smart Training Center - ECPv6.15.18//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Smart Training Center
X-ORIGINAL-URL:https://smart-training-center.com
X-WR-CALDESC:Events for Smart Training Center
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Asia/Krasnoyarsk
BEGIN:STANDARD
TZOFFSETFROM:+0700
TZOFFSETTO:+0700
TZNAME:+07
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260406T083000
DTEND;TZID=Asia/Krasnoyarsk:20260408T160000
DTSTAMP:20260404T101525
CREATED:20241122T165031Z
LAST-MODIFIED:20260207T021400Z
UID:1049-1775464200-1775664000@smart-training-center.com
SUMMARY:Remaining Life Assessment (RLA)
DESCRIPTION:Background & About the Course:\nRemaining Life Assessment (RLA) is a crucial process in asset management\, particularly for industrial equipment\, power plants\, and critical infrastructure. Over time\, materials and components degrade due to operational stresses\, environmental factors\, and aging. Assessing the remaining service life of these assets is essential to ensure safety\, reliability\, and cost-effective operation. By implementing RLA methodologies\, organizations can optimize maintenance strategies\, prevent catastrophic failures\, and extend the lifespan of critical assets. \nThis training program provides participants with an in-depth understanding of the principles\, methodologies\, and tools used in Remaining Life Assessment. The course covers the fundamentals of material degradation\, inspection techniques\, failure analysis\, and predictive modeling. Participants will gain practical insights into industry best practices and regulatory considerations\, enabling them to make informed decisions regarding asset life extension and risk mitigation. \nTraining Objectives\n\nUnderstand the fundamental concepts of Remaining Life Assessment.\nIdentify key factors affecting asset degradation and failure mechanisms.\nLearn various inspection and testing techniques for RLA.\nDevelop skills in data analysis and predictive modeling for asset lifespan estimation.\nUnderstand regulatory requirements and industry standards related to RLA.\nEnhance decision-making capabilities for maintenance\, repair\, and replacement planning.\nExplore case studies and real-world applications of RLA methodologies.\n\nWho Should Attend\n\nMaintenance and reliability engineers\nAsset integrity managers\nInspection and testing professionals\nPlant engineers and operators\nRisk assessment and safety professionals\nResearchers and consultants in asset management\nIndustrial professionals involved in life cycle assessment\n\nTraining Outline\n\nIntroduction to Remaining Life Assessment – Overview of RLA principles\, importance\, and applications.\nMaterial Degradation Mechanisms – Corrosion\, fatigue\, creep\, and other aging factors affecting asset life.\nInspection and Non-Destructive Testing (NDT) Techniques – Methods for assessing material integrity and early failure detection.\nFailure Analysis and Root Cause Identification – Investigating causes of equipment failure to improve reliability.\nPredictive Modeling and Life Estimation – Tools and techniques for estimating the remaining life of assets.\nRegulatory and Industry Standards – Compliance requirements and best practices for asset life management.\nRisk-Based Maintenance Planning – Strategies for optimizing maintenance based on RLA findings.\nFraud & Mitigation in Asset Life Assessment – Ensuring data integrity and preventing manipulation in RLA processes.\nCase Studies & Best Practices\n\nAbout the Course Leaders:\nIr. Deddy Nugraha dan Dwi Fitrianto\, ST. \nIr. Deddy Nugraha menyelesaikan pendidikan Sarjana dari Teknik Mesin – Institut Teknologi Bandung\, dan mendalami bidang Power Plant (Gas Turbine\, Steam Turbine\, Pump & Compressor) khususnya di bidang Reliability\, Quality\, dan Maintenance Management. Beliau berpengalaman sebagai Senior Propulsion Engineer di Universal Maintenance Center PT. IPTN (1991 – 2002) dan kini berperan sebagai Reliability Engineer dan Professional Training Instructor. Pengalaman beliau sebagai instruktur training mencakup berbagai perusahaan terkemuka seperti PT. Tjiwi Kimia\, PT. Suparma\, PT. Indah Kiat Pulp & Paper\, PT. Indonesia Power\, British Petroleum\, PT. Pertamina\, dan banyak lainnya. \nPublic Training berikutnya : 27 – 29 July\, 2026
URL:https://smart-training-center.com/event/remaining-life-assessment-rla/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Maintenance,Manajemen,Production Operation
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/09/Plant-remaining-life-assessment.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260407T083000
DTEND;TZID=Asia/Krasnoyarsk:20260410T160000
DTSTAMP:20260404T101525
CREATED:20241122T160422Z
LAST-MODIFIED:20260209T081850Z
UID:981-1775550600-1775836800@smart-training-center.com
SUMMARY:Downhole & Surface Production Equipment
DESCRIPTION:Background & About the Course:\nEfficient production in the oil and gas industry relies heavily on the optimal performance of both downhole and surface equipment. These components play a critical role in enhancing well productivity\, minimizing downtime\, and ensuring the safe operation of production facilities. Understanding the design\, selection\, operation\, and maintenance of this equipment is essential for maximizing reservoir output and prolonging asset life. \nThis course provides participants with in-depth knowledge of downhole and surface production equipment\, focusing on their functions\, failure modes\, and maintenance strategies. The training will cover essential topics such as artificial lift systems\, wellheads\, flowlines\, and separators. Participants will gain practical insights through case studies and discussions on emerging technologies and industry best practices. \nCourse Objectives:\n\nUnderstand the types and functions of downhole and surface production equipment.\nIdentify key factors affecting the performance and lifespan of production equipment.\nLearn troubleshooting techniques to address equipment malfunctions and failures.\nGain insights into the latest technologies and advancements in production systems.\nApply best practices for the maintenance and optimization of production equipment.\nDevelop skills to evaluate equipment selection based on reservoir conditions.\n\nWho Should Attend:\n\nProduction and operations engineers.\nWell services and intervention teams.\nMaintenance and field technicians.\nAsset integrity and reliability engineers.\nDrilling and completion personnel.\nProject managers involved in oil and gas production.\n\nCourse Content:\n\nIntroduction to Production Equipment\n\n\nOverview of downhole and surface production equipment.\nKey considerations in equipment selection and installation.\n\n\nDownhole Equipment\n\n\nTypes and functions of downhole equipment (tubing\, packers\, subsurface safety valves).\nArtificial lift systems (ESP\, gas lift\, rod pumps).\nCompletion equipment and design considerations.\nCommon downhole failures and troubleshooting techniques.\n\n\nSurface Production Equipment\n\n\nWellheads\, chokes\, and flowlines – design and operation.\nSeparators\, heaters\, and scrubbers – working principles and configurations.\nStorage tanks and surface piping systems.\nPressure control and fluid handling.\n\n\nMonitoring and Maintenance\n\n\nInspection\, monitoring\, and performance evaluation.\nPreventive and corrective maintenance strategies.\nVibration analysis\, corrosion monitoring\, and failure analysis.\n\n\nOptimization and Technology Integration\n\n\nInnovations in production equipment and automation.\nDigital tools for equipment monitoring and predictive maintenance.\nCase studies on equipment upgrades and retrofits.\n\n\nCase Studies and Practical Applications\n\n\nReal-world case studies of production challenges and solutions.\nGroup discussions and problem-solving exercises.\n\nABOUT THE COURSE LEADER:\nProf. Dr.-Ing. Bonar Tua Halomoan Marbun \nPublic Training berikutnya : 27 – 30 July\, 2026 | 19 – 22 Oktober\, 2026
URL:https://smart-training-center.com/event/downhole-surface-production-equipment/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Electrical,Engineering,Instrument and control,Maintenance,Mechanical,Oil & Gas,Production Operation
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/11/Downhole-Surface-Production-Equipment.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260408T083000
DTEND;TZID=Asia/Krasnoyarsk:20260410T160000
DTSTAMP:20260404T101525
CREATED:20241122T155209Z
LAST-MODIFIED:20260209T073801Z
UID:938-1775637000-1775836800@smart-training-center.com
SUMMARY:Electrical and Mechanical Safety
DESCRIPTION:Background & About the Course:\nKeselamatan kerja di bidang listrik dan mekanik sangat penting untuk menjaga keberlangsungan operasional perusahaan\, mencegah kecelakaan\, serta melindungi keselamatan tenaga kerja. Kejadian kecelakaan akibat kegagalan sistem kelistrikan atau kegagalan mekanis di tempat kerja bisa menimbulkan risiko serius seperti kebakaran\, cedera fisik\, hingga kerugian finansial yang besar. Oleh karena itu\, penting bagi setiap profesional yang bekerja di bidang ini untuk memahami prinsip dasar keselamatan\, prosedur operasi yang aman\, serta teknik mitigasi risiko yang efektif. \nPelatihan “Electrical & Mechanical Safety” dirancang untuk memberikan pemahaman mendalam tentang bahaya potensial yang berhubungan dengan sistem kelistrikan dan mekanik di lingkungan industri. Dengan memberikan wawasan tentang peraturan keselamatan yang berlaku\, teknik-teknik preventif\, serta cara bertindak dalam situasi darurat\, peserta diharapkan mampu memitigasi risiko kecelakaan di tempat kerja dan memastikan keberlangsungan operasional yang aman. \nCourse Objectives:\n\nMemahami prinsip dasar keselamatan kelistrikan dan mekanik di tempat kerja.\nMengidentifikasi bahaya potensial terkait dengan peralatan listrik dan mekanik.\nMenerapkan prosedur keselamatan untuk bekerja dengan aman pada peralatan listrik dan mekanik.\nMengetahui peraturan dan standar keselamatan yang relevan untuk sistem kelistrikan dan mekanik.\nMenggunakan alat pelindung diri (APD) yang sesuai dengan jenis pekerjaan.\nMengelola situasi darurat dan respon terhadap kecelakaan terkait listrik dan mekanik.\nMenyusun rencana pemeliharaan preventif untuk mencegah kecelakaan.\n\nWho Should Attend:\n\nOperator mesin dan teknisi listrik\nInsinyur dan supervisor pemeliharaan\nManajer atau pengawas yang bertanggung jawab atas keselamatan kerja\nKaryawan yang bekerja dengan atau mengelola peralatan listrik dan mekanik\nProfesional yang terlibat dalam perencanaan\, perawatan\, dan inspeksi peralatan industri\nPihak-pihak yang berperan dalam implementasi kebijakan keselamatan kerja\n\nCourse Content:\nDasar-Dasar Keselamatan Listrik dan Mekanik \n\nKeselamatan Listrik:\n\nPrinsip dasar kelistrikan dan bahaya listrik\nPenggunaan alat pelindung diri (APD) yang tepat\nStandar keselamatan listrik (IEC\, OSHA)\n\n\nPeralatan Listrik:\n\nJenis dan sistem kelistrikan yang aman\nPemeliharaan dan prosedur shutdown peralatan listrik\n\n\nKeselamatan Mekanik:\n\nJenis bahaya mekanik (gerakan mesin\, benturan\, alat tajam)\nAPD untuk pekerjaan mekanik (pelindung mata\, sarung tangan\, sepatu keselamatan)\n\n\n\nPenerapan Praktis Keselamatan Listrik dan Mekanik \n\nSistem Pengendalian Bahaya Listrik:\n\nIdentifikasi bahaya listrik di tempat kerja\nProsedur Lockout-Tagout dan pengamanan peralatan listrik\n\n\nKeselamatan Operasional Peralatan dan Mesin:\n\nIdentifikasi risiko pada peralatan mekanik\nProsedur keselamatan saat memulai dan menghentikan mesin\nPemeliharaan preventif peralatan mekanik\n\n\n\nPenanganan Darurat dan Evaluasi Keselamatan \n\nRespon Terhadap Kejadian Darurat:\n\nPenanganan kebakaran listrik dan tindakan pertama kecelakaan listrik\nPertolongan pertama cedera mekanik (patah tulang\, luka robek)\nPenggunaan alat pemadam kebakaran dan teknik pemadaman listrik\n\n\nPerencanaan Pemeliharaan Preventif:\n\nStrategi pemeliharaan untuk mengurangi risiko\nPemeriksaan rutin dan inspeksi peralatan listrik dan mekanik\n\n\nEvaluasi dan Peningkatan Keselamatan:\n\nTeknik evaluasi kecelakaan dan hampir kecelakaan (Near Miss)\nPembaruan prosedur keselamatan dan pelatihan berkala\n\n\n\nABOUT THE COURSE LEADER:\nDR. Toto Tohir\, ST.\, MT/ Martono\, ST.\, MT \n Tohir has received a DR degree\, hopefully he will be able to achieve Professor: \n\nS3: Electrical Engineering UGM\nS2: Electrical Engineering ITB\nS1: Electrical Engineering ITB\n\nIn addition to formal education\, Mr. Toto is also certified as: \n\nProfessional Engineer from PII (Indonesia Professional Engineer Association)\nAhli Teknik Tenaga Listrik – Madya from PII (Electrical Professional)\nAhli K3 Listrik from the Indonesia Ministry of Manpower (HSE Electrical Professional)\nAhli Kelistrikan Instalasi Pemanfaatan Tegangan rendah dari BNSP\nAhli Kelistrikan Instalasi Pemanfaatan Tegangan rendah from BNSP (Indonesia Professional Certification Agency\nProfessional Lecturer (Indonesia Ministry of Research\, Technology and Higher Education)\n\nProfessional Expertise:\n– PT. Kereta Api Indonesia (KAI)\, 2002 – 2010 \n(Indonesia Railways State own company)\n– PT. LEN Indonesia/Surya Energi Indonesia\, 2011-2012\n– Indonesian Department of Transportation\, 2014-2015\n– PT. Upaya Riksa Patra\, 2002-present\n– PT. Multitek Batam 2014-present\n– PT. Andalan Mutu Energi 2017-present \nProjects that have been and are being handled: \n\nControl System and Communication Network PT.KAI in collaboration with ADB\nSmart Grid Solar Cell System BPPT National Project June – December 2011\nSuper Block PT. Freeport Indonesia\, October – November 2016\nGenerator Test Inspection\, Electrical Installation PT. CBI Central Kalimantan – March 2016-present\nInspection of Lightning Conductor Installation Test of Tanjung Kasam Power Plant Batam June 2016 (PT.Multitek Batam)\n\nIn addition to teaching on campus and as a consultant\, Mr. Toto also often shares his knowledge through training in many companies such as: Kemnaker\, BNSP\, Petrogas\, Geoservices\, Indonesia Power\, etc. \nPublic Training berikutnya : 6 – 8 Oktober\, 2026 | 7 – 9 Desember\, 2026
URL:https://smart-training-center.com/event/electrical-mechanical-safety/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Electrical,Maintenance,Mechanical,Production Operation,Project
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/11/Electrical-Mechanical-safety.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260408T083000
DTEND;TZID=Asia/Krasnoyarsk:20260410T160000
DTSTAMP:20260404T101525
CREATED:20241122T161818Z
LAST-MODIFIED:20260207T024233Z
UID:996-1775637000-1775836800@smart-training-center.com
SUMMARY:Compressor Maintenance & Operation
DESCRIPTION:Background:\nKompresor merupakan peralatan vital dalam berbagai sektor industri\, khususnya pada industri proses pembangkit listrik\, oil & gas\, petrokimia\, manufaktur\, dll. Selain berfungsi sebagai penyedia udara atau gas bertekanan\, kompresor berperan langsung dalam menjaga kontinuitas proses produksi\, sistem kontrol\, serta efisiensi operasi. Pada kompresor sentrifugal\, gangguan operasi dapat menyebabkan penurunan kapasitas produksi\, peningkatan biaya operasi\, hingga risiko keselamatan kerja akibat terjadinya trip mendadak atau kondisi operasi yang tidak stabil. Oleh karena itu\, Compressor Operation & Maintenance yang baik dapat mendukung revenue generation yang dapat diandalkan. \nSeiring meningkatnya tuntutan keandalan & keselamatan operasi\, perlu SDM yang memiliki kompetensi teknis dalam pengoperasian & pemeliharaan kompresor. Keterbatasan pemahaman terhadap prinsip kerja\, karakteristik operasi & teknik pemeliharaan yang tepat sering menjadi penyebab terjadinya unplanned shutdown & kerusakan berulang. Oleh karena itu\, pelatihan Compressor Operation & Maintenance ini dirancang untuk membekali peserta kemampuan praktis agar mampu mengoperasikan kompresor secara aman\, andal\, serta menerapkan pemeliharaan yang efektif guna mendukung keberlangsungan operasi. \nObjectives:\n1. Menjelaskan dan menerapkan prinsip kerja kompresor\n2. Melakukan pengoperasian kompresor sentrifugal secara aman & andal\n3. Mengidentifikasi komponen utama & sistem pendukung kompresor\n4. Menerapkan strategi pemeliharaan kompresor yang efektif\n5. Melaksanakan kegiatan scheduled maintenance\n6. Menerapkan teknik dasar pemeliharaan prediktif\n7. Menganalisis hasil inspeksi getaran mesin\n8. Menerapkan konsep & prosedur dasar shaft alignment\n9. Memahami dan menerapkan prinsip rotor balancing\n10. Melakukan troubleshooting dasar failure analysis serta merekomendasikan tindakan perbaikan \n\n\nRecommended Participants:\n– Mechanical & Rotating Engineer/ Supervisor/ Foreman\n– Plant Maintenance Engineer/ Supervisor/Foreman\n– Production Operation Engineer/ Supervisor/ Foreman\n– Process Engineer/Supervisor. \n\n\nCourse Outline:\n1. Compressor Fundamentals \n• Peran dan fungsi kompresor dalam sistem industri\n• Klasifikasi kompresor (positive displacement & dynamic compressor)\n• Prinsip dasar kompresi gas dan parameter operasi utama\n• Compressor performance parameters (pressure\, flow\, temperature\, efficiency) \n2. Centrifugal Compressor System \n• Prinsip kerja centrifugal compressor\n• Komponen utama: impeller\, diffuser\, casing\, shaft\, bearing\, seal\n• Sistem pendukung (Lubrication\, Seal Gas\, Cooling)\n• Compressor operating curve dan surge phenomenon\n• Pengenalan sistem anti-surge dan proteksi kompresor \n3. Compressor Operation \n• Start-up\, normal operation\, dan shutdown procedure\n• Safe operating limits dan abnormal operating conditions\n• Common operational problems & indikasi awal gangguan\n• Best practices dalam operasi kompresor sentrifugal \n4. Maintenance Strategy for Compressor \n• Konsep reliability & maintainability rotating equipment\n• Maintenance philosophy: corrective\, preventive\, predictive\, & proactive maintenance\n• Failure modes pada kompresor & pendekatan mitigasinya \n5. Scheduled (Preventive) Maintenance \n• Periodic inspection maintenance checklist\n• Bearing\, seal\, dan lubrication system maintenance\n• Alignment check dan coupling inspection\n• Documentation & maintenance record keeping \n6. Predictive Maintenance Techniques \n• Konsep condition-based maintenance (CBM)\n• Pengenalan vibration monitoring pada kompresor\n• Parameter getaran dan batasan (severity level)\n• Integrasi vibration\, temperature\, dan oil analysis \n7. Fundamentals of Vibration Inspection \n• Dasar getaran mesin berputar\n• Jenis sensor dan metode pengukuran getaran\n• Sumber utama getaran pada kompresor sentrifugal \n8. Vibration Data Analysis \n• Interpretasi spektrum getaran\n• Identifikasi masalah umum: unbalance\, misalignment\, looseness\, bearing fault \n9. Shaft Alignment \n• Pentingnya alignment terhadap keandalan kompresor\n• Jenis misalignment dan dampaknya\n• Metode alignment (dial indicator & laser alignment – konsep) \n10. Rotor Balancing \n• Konsep unbalance dan pengaruhnya terhadap getaran\n• Static dan dynamic balancing\n• Prosedur dasar rotor balancing \n11. Basic Troubleshooting & Case Discussion \n• Pola kerusakan umum pada kompresor\n• Basic root cause analysis \n\n\nAbout The Course Leader:\nCecep Slamet Abadi\, S.T.\, M.T \nPublic Training berikutnya : 7 – 9 Desember\, 2026
URL:https://smart-training-center.com/event/compressor-maintenance-operation/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Engineering,Maintenance
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260413T083000
DTEND;TZID=Asia/Krasnoyarsk:20260415T160000
DTSTAMP:20260404T101525
CREATED:20241122T165033Z
LAST-MODIFIED:20260207T032243Z
UID:1055-1776069000-1776268800@smart-training-center.com
SUMMARY:Maintenance & Reliability for oil and gas upstream operation
DESCRIPTION:Background & About the Course:\nIn Indonesia\, particularly within the upstream oil and gas sector\, manufacturing\, and other heavy industries\, there is a common challenge: aging plants and equipment\, many of which have been in operation for over 30 years. This aging infrastructure\, coupled with low worker qualifications\, often leads to human errors\, contributing to a decline in production targets. To counter these challenges\, a unified vision and understanding of achieving production goals are essential. This involves maintaining assets to ensure high reliability and availability\, even as they age. \nUltimately\, implementing the right maintenance strategy is crucial for ensuring positive economic outcomes from capital investments and operating costs. This course will guide management in making informed decisions to remain profitable while maintaining operational efficiency. \nCourse Objectives:\nBy the end of the “Maintenance & Reliability for Oil and Gas Upstream Operation” training\, participants will be able to: \n\nUnderstand the fundamentals of maintenance and reliability principles specific to upstream oil and gas operations.\nApply the ISO 55000 Asset Management framework in managing operational facilities.\nAlign maintenance strategies with PTK 041 Revision 03 for optimal compliance and efficiency.\nAnalyse and improve maintenance performance through reliability Centred Maintenance (RCM) and condition-based monitoring (CBM).\nIdentify and mitigate risks affecting operational reliability.\nDevelop actionable plans for lifecycle cost optimization and asset integrity management.\n\nWho Should Attend:\nThis course is recommended for: \n\nMechanical Engineers/Superintendents/Supervisors/Managers\nMaintenance Superintendents/Engineers/Supervisors/Managers\nReliability Engineers\nOperation Managers/Superintendents/Supervisors/Engineers\nAnyone interested in enhancing their knowledge in this field\n\nCourse Content:\n\nMaintenance and Reliability Fundamentals\n\nIntroduction to Maintenance and Reliability in Upstream Operations\nKey Principles of Asset Management (ISO 55000 Overview)\nMaintenance Strategy Development: Preventive\, Predictive\, and Proactive Approaches\nOverview of PTK 041 Revision 03: Facilities Operation Maintenance by SKK Migas\nCase Study: Best Practices in Maintenance Planning\n\n\nMaintenance Tools\, Techniques\, and Risk Management\n\nCondition-Based Monitoring (CBM) and Predictive Analytics\nEquipment Reliability Calculations for Reliable System Operation\nFailure Modes and Effects Analysis (FMEA) for Oil & Gas Operations\nContinuous Improvement Initiatives for Maintenance Team Effectiveness\nWorkshop: Applying Equipment Reliability Calculations in Operations\n\n\nAsset Optimization\, KPIs\, and Integration\n\nISO 55000 and Its Application in Asset Lifecycle Management\nIntegrating Asset Management with PTK 041 for Compliance\nDeveloping Key Performance Indicators (KPIs): Leading and Lagging Metrics\nData-Driven Maintenance: Leveraging IoT and Digital Tools\nMaintenance Strategies for Long-Term Reliability Improvement\nFinal Case Study: Developing a Maintenance & Reliability Roadmap\n\n\n\nAbout the Course Leaders:\nIr. Deddy Nugraha & Team \nIr. Deddy Nugraha completed his Bachelor’s degree in Mechanical Engineering from Institut Teknologi Bandung\, specializing in Power Plant (Gas Turbine\, Steam Turbine\, Pump & Compressor) with a focus on Reliability\, Quality\, and Maintenance Management. He has extensive experience as a Senior Propulsion Engineer at Universal Maintenance Center PT. IPTN (1991 – 2002) and currently serves as a Reliability Engineer and Professional Training Instructor. His training experience includes working with PT. Tjiwi Kimia\, PT. Suparma\, PT. Indah Kiat Pulp & Paper\, PT. Indonesia Power\, British Petroleum\, PT. Pertamina\, PT. Krakatau Steel\, PT. Amoco Mitsui\, PT. Semen Gresik\, Indocement Tunggal Prakarsa\, PT. Puncak Jaya Power\, Medco Energy\, and others. \nPublic Training berikutnya : 19 – 21 Mei\, 2026 | 18 – 20 Agustus\, 2026
URL:https://smart-training-center.com/event/maintenance-reliability-for-oil-and-gas-upstream-operation/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Maintenance,Power Generation
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260414T083000
DTEND;TZID=Asia/Krasnoyarsk:20260416T160000
DTSTAMP:20260404T101525
CREATED:20241122T170039Z
LAST-MODIFIED:20260209T074242Z
UID:1081-1776155400-1776355200@smart-training-center.com
SUMMARY:Business Continuity Management
DESCRIPTION:About the Course:\nIn an increasingly complex and interconnected environment\, organizations encounter various challenges\, including natural disasters\, cyber threats\, and global health crises. Business Continuity Management (BCM) is an essential discipline that enables organizations to identify potential risks and minimize their effects. By adopting a structured BCM framework\, businesses can maintain critical operations during and after disruptions\, thereby protecting their financial health\, brand reputation\, and stakeholder confidence. \nThis comprehensive 3-day training program is designed to provide participants with the knowledge and tools necessary to foster resilience within their organizations. Attendees will delve into industry standards\, such as ISO 22301\, and acquire practical skills for risk assessment\, continuity planning\, and effective testing. The program focuses on real-world applications\, ensuring that participants leave with actionable strategies to improve their organization’s preparedness for unexpected challenges. \nCourse Objectives:\nBy the end of this training\, participants will be able to: \n\nComprehend the principles and frameworks of Business Continuity Management.\nIdentify potential risks and assess their impact on business operations.\nCreate a comprehensive Business Continuity Plan (BCP).\nImplement BCM strategies and solutions tailored to their organization’s needs.\nConduct effective testing and maintenance of BCPs.\nEnhance organizational resilience through ongoing improvement practices.\n\nWho Should Attend:\nThis training is ideal for: \n\nRisk Managers\nBusiness Continuity Practitioners\nOperations and Facility Managers\nIT and Cybersecurity Professionals\nHR Managers and Team Leaders\nAny professional involved in organizational risk management and continuity planning\n\nCourse Content:\n1.Foundations of Business Continuity Management \n\n\n\nIntroduction to BCM and its significance\nStandards and frameworks (ISO 22301) and local regulations\nRisk identification and impact analysis\nTechniques for Business Impact Analysis (BIA)\nLocal Regulation\n\n\n\n2.Developing and Implementing a Business Continuity Plan \n\n\n\nEssential components of a Business Continuity Plan\nStrategies for risk mitigation and response\nCrisis communication and stakeholder management\nIT disaster recovery and cybersecurity considerations\n\n\n\n3.Testing\, Maintenance\, and Continuous Improvement \n\n\n\nTesting the Business Continuity Plan: scenarios and exercises\nPost-exercise review and adjustments to the plan\nFostering a culture of resilience\nCase studies and real-world applications\n\n\n\nABOUT THE COURSE LEADER:\nDr. Djadja Achmad Sardjana\, S.T.\, M.M. Dr. Djadja is a Senior Executive specializing in Strategic Planning\, Business Expansion\, Project Management\, Process Improvement\, Quality Assurance\, Knowledge Management\, Human Capital Learning\, Corporate University\, and Operations Management. He has held key positions at AT&T/Lucent\, Ariawest/AT&T Wireless\, M-Web\, Motorola\, and Sampoerna Telekom. \nWith over 20 years of experience\, Dr. Djadja has a proven track record of driving revenue growth and enhancing business performance in competitive markets. He excels as an executive mentor and coach\, with expertise in building learning organizations\, managing knowledge\, developing new business processes\, securing customer loyalty\, and establishing strong partnerships with external stakeholders. \nPublic Training berikutnya : 4 – 6 Agustus\, 2026 | 9 – 11 November\, 2026
URL:https://smart-training-center.com/event/business-continuity-management/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Finance,HRD,Information Technology,Maintenance,Manajemen,Production Operation
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/11/BCM-Present-e1739243898299.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260415T083000
DTEND;TZID=Asia/Krasnoyarsk:20260417T160000
DTSTAMP:20260404T101525
CREATED:20241122T160336Z
LAST-MODIFIED:20260207T065043Z
UID:966-1776241800-1776441600@smart-training-center.com
SUMMARY:Hazard & Operability Studies (HAZOPS) & Hazard Identification Study (HAZIDS)
DESCRIPTION:BACKGROUND:\nHazard & Operability Studies (HAZOPS) & Hazard Identification Study (HAZIDS) is very comon terminology in oil and gas industries and other types where its operation involve potential severe hazards. \nHAZOPS stand for hazard Hazards & Operability Staudye. It is a systematic method of analysis of the operability parameters deviations using a specific vocabulary. The required documents in order to accomplish the study are the equipment sketches (PID\, PFDs) and a process description. \nHAZID- is a utilized technique for the identification of the significant hazards related to an operational activity. The study is based on key-words such as Control philosophy/ Flammable/ Toxic materials Hazards related to Electricity/ Security hazards/ Health hazards/ Hazards related to Height Safety Equipment – State of the Art/Operation philosophy (Manning\, Training\, etc.) \nBackground & About the Course\nHAZOP (Hazard and Operability Study) is a systematic analysis method used to evaluate deviations in operability parameters through a specific vocabulary. Essential documents for conducting a HAZOP study include equipment sketches (P&IDs\, PFDs) and process descriptions. HAZID (Hazard Identification) is a technique used to identify significant hazards associated with operational activities\, focusing on keywords related to control philosophy\, flammable and toxic materials\, electrical hazards\, security hazards\, health hazards\, and safety equipment. \nThis training course aims to equip participants with the knowledge and skills necessary to effectively conduct HAZOP and HAZID studies\, enhancing their ability to manage risks and ensure safety in industrial operations. \nCourse Objectives\nUpon completion of this course\, participants will be able to: \n\nUnderstand the concept of risk and the risk management process.\nProvide a framework for HAZOP within risk assessment and an HSE Management System.\nReview the role of HAZOP within HSE project plans.\nIncrease familiarity with HAZOP protocol\, logic\, structure\, and methodology.\nDescribe the role and structure of the HAZOP Team and procedures.\nIntroduce the role\, responsibilities\, and conduct of a HAZOP Team Leader.\nGain hands-on experience in applying HAZOP to various processes and systems.\n\nWho Should Attend\nThis training is recommended for: \n\nProduction and Facilities Managers\nEngineers (Design\, Process\, Facilities\, Instrumentation\, and Control)\nOperations and Safety Process Operators\nSafety/Environment Personnel\nPlant Operators\nMaintenance Personnel\n\nCourse Outline\n\nHAZOP Method\n\n\nHAZOP study assumptions and applications\nIdeal HAZOP review reference data\nCredible and non-credible scenarios\nHAZOP technical suggestions and recommendations\nAdministrative and engineering controls\nApproaches to assigning protection layers\nPerformance-based and prescriptive approaches (API-RP-14C)\nHAZOP workshop\n\n\nHazard Identification\n\n\nHazard management process and factors increasing hazard potential\nUnderstanding risk\, consequences\, and tolerable risk\nEvaluating risk using ALARP and risk matrices\nProtective measures and risk reduction strategies\nProcess deviations and undesirable events\nSeparation of process control and safety control systems\n\n\nHazard Analysis\n\n\nRisk criteria and estimating likelihood\nUnderstanding failure modes: safe\, dangerous\, detected\, and undetected failures\nSafety Instrumented Systems (SIS) and Safety Integrity Levels (SIL)\nRisk reduction and reliability assessment\nLayer of Protection Analysis (LOPA) and Fault Tree Analysis (FTA)\n\n\nCase Study\n\n\nApplication of HAZOP and HAZID methodologies in real-world scenarios.\n\n\n\nABOUT THE COURSE LEADER:\nIr. Alfia Djabar\, Facilitator for HAZOP\, HAZID and SIL Classification study. Working experiences more than 30 years in oil & gas industries; 13 years at Chevron Pacific Indonesia in Duri Riau\, 12.5 years at several engineering consultant in Jakarta with various positions (facilities engineer\, process engineer\, project engineer and project manager)\, and full time Facilitator since January 2018. \nLead HAZOP\, HAZID and SIL workshops more than 105 times for upstream oil & gas facilities\, Pertamina refineries\, detergent plant\, and geothermal facilities. Experienced Excel VBA programmer and have developed dozen engineering calculation and data management: \n\ncontrol valve sizing (gas & liquid)\,\nPSV sizing\,\n2-phase and 3-phase separator sizing (vertical an horizontal)\,\nSingle & network hydraulic pipeline (gas & liquid)\,\nGas pipe noise prediction\,\nEmployee timesheet for engineering projects\,\nCause & Effect for searching and finding\,\nHAZOP and SIL Workbook packaged\n\nPublic Training berikutnya : 4 – 6 Agustus\, 2026 | 9 – 11 November\, 2026
URL:https://smart-training-center.com/event/hazard-operability-studies-hazops-hazard-identification-study-hazids/
LOCATION:Jakarta
CATEGORIES:Engineering,Maintenance,Production Operation,Q-HSE
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/11/Hazard-Operability-Studies-HAZOP-Hazard-Identification-Study-HAZID.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260420T080000
DTEND;TZID=Asia/Krasnoyarsk:20260421T170000
DTSTAMP:20260404T101525
CREATED:20260207T072232Z
LAST-MODIFIED:20260209T074719Z
UID:2446-1776672000-1776790800@smart-training-center.com
SUMMARY:Coal Dust Explosion
DESCRIPTION:Background & Objectives:\nCoal dust explosion is one of the most hazardous risks in coal-fired power plants & coal handling facilities. Fine coal particles are highly combustible & under certain conditions\, can lead to catastrophic explosions when exposed to ignition sources. The risk becomes even more critical as operations scale up & involve large quantities of stored or transported coal\, often in semi-enclosed environments. A comprehensive understanding of coal dust characteristics\, explosion mechanisms & preventive strategies is essential to ensure plant safety & avoid operational disruptions or major damage. \nThis training program is designed to provide participants with an in-depth understanding of coal dust explosion hazards\, relevant safety standards (both local and international)\, and best practices for prevention and mitigation. Over three days\, the course will combine technical theory with real-world case studies\, covering topics such as ventilation systems\, housekeeping\, inerting\, ignition control\, and explosion suppression systems. The program aims to equip participants with practical skills to assess risks effectively and implement robust control measures tailored to coal-fired operations. \nOn this training you should:\n– Understand and be able to explain the types of risks\, causes of risks\, and efforts to prevent and control flying dust\, spontaneous combustion\, and coal explosions due to dust and gas.\n– Be able to prevent and reduce risks related to coal dust explosions \n\n\nRecommended Participants:\n– CHP Patrol\, Plan Operator\, Technician and HSE.\n– Supervisor and UC/AUC Employee who working in the Hazard area. \n\n\nCourse Outline:\n1. Coal Classification and Characteristic\n2. Combustion Process\n3. Coal Ash and Dust\n4. Coal Dust Accumulation\n5. Explosion\n6. General Precautions\n7. Abnormal condition and emergency procedure\n8. Inerting steam and firefighting system\n9. Dust prevention and control\n10. Explosion prevention and control\n11. Case Studies & Discussion \nPRACTICE USING SIMULATORS:\n– Explosion impact control (Explosion Box)\n– Explosion prone temperature control (Explosion Box) \nOBSERVATIONS:\na. Control of Spontaneous Combustion Symptoms:\n– Observation of coal stockpile for compaction process: Average Pile or Compacting\n– Observation of coal unloading area with excavator\nb. Control of Fugitive Dust:\n– Observation of fugitive dust control in dust suppression area\, hopper\, transfer tower\nc. Cleaning of Dust Deposits:\n– Observation of the dust deposit cleaning process in related work areas\nd. Prevention of Spontaneous Combustion:\n– Field observation for heat and gas detection in areas where spontaneous combustion occurs \nDELIVERY METHOD:\n– Lecture\n– Discussion\n– Observation & Case Study\n– Video Simulation Coal Dust Explosion \n\n\nAbout The Course Leader:\nMarhan Saub – Practitioner \nPublic Training berikutnya : 7 – 8 Oktober\, 2026 | 7 – 8 Desember\, 2026
URL:https://smart-training-center.com/event/coal-dust-explosion/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Engineering,Maintenance,Q-HSE
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260421T083000
DTEND;TZID=Asia/Krasnoyarsk:20260424T160000
DTSTAMP:20260404T101525
CREATED:20260207T090809Z
LAST-MODIFIED:20260209T081015Z
UID:2451-1776760200-1777046400@smart-training-center.com
SUMMARY:Hydraulic & Pneumatic (Practical & Theory)
DESCRIPTION:Background\nSistem hidrolik dan pneumatik merupakan teknologi utama dalam berbagai aplikasi industri\, mulai dari manufaktur\, pertambangan\, minyak dan gas\, hingga otomasi pabrik. Keduanya digunakan untuk mentransmisikan energi\, menggerakkan aktuator\, serta mengendalikan proses dengan presisi dan keandalan tinggi. \nNamun\, dalam praktiknya\, banyak permasalahan operasional seperti kebocoran\, tekanan tidak stabil\, respon lambat\, hingga kegagalan sistem yang disebabkan oleh kurangnya pemahaman prinsip kerja\, kesalahan instalasi\, maupun perawatan yang tidak tepat. Oleh karena itu\, diperlukan pelatihan yang tidak hanya membahas teori\, tetapi juga memberikan pengalaman praktik langsung agar peserta benar-benar memahami cara kerja\, pengoperasian\, serta troubleshooting sistem hidrolik dan pneumatik. \nTraining Hydraulic & Pneumatic (Practical & Theory) dirancang untuk memberikan pemahaman menyeluruh\, seimbang antara konsep dasar dan penerapan di lapangan. \nObjectives\nSetelah mengikuti pelatihan ini\, peserta diharapkan mampu: \n\nMemahami prinsip dasar sistem hidrolik dan pneumatik\nMengidentifikasi komponen utama dan fungsinya dalam sistem\nMembaca dan memahami simbol serta diagram hidrolik dan pneumatik\nMengoperasikan sistem hidrolik dan pneumatik secara aman dan efektif\nMelakukan instalasi dasar dan setting sistem\nMenganalisis masalah dan melakukan troubleshooting sederhana\nMenerapkan praktik perawatan (maintenance) yang benar untuk\nmencegah kerusakan\nMeningkatkan keandalan dan efisiensi sistem di lingkungan kerja\n\nRecommended Participants \n\n\nPelatihan ini sangat direkomendasikan untuk: \n\nTeknisi maintenance (mekanik\, elektrik\, instrument)\nSupervisor dan engineer maintenance\nOperator mesin dan peralatan produksi\nEngineer produksi dan proses\nTeknisi utility dan facility\nForeman dan team leader operasional\nFresh graduate teknik yang ingin memperdalam kompetensi praktis\n\n\n\nCourse Outline\nA. Introduction to Hydraulic & Pneumatic Systems\n\nPengertian dan konsep dasar hidrolik dan pneumatik\nPerbedaan sistem hidrolik dan pneumatik\nAplikasi hidrolik dan pneumatik di industri\nKelebihan dan keterbatasan masing-masing sistem\n\nB. Basic Theory of Hydraulics\n\nPrinsip Pascal dan hukum dasar fluida\nTekanan\, aliran\, dan gaya dalam sistem hidrolik\nHubungan tekanan\, luas penampang\, dan gaya\nJenis-jenis fluida hidrolik dan karakteristiknya\n\nC. Basic Theory of Pneumatics\n\nPrinsip kerja udara bertekanan\nKarakteristik udara sebagai media kerja\nTekanan\, volume\, dan temperatur (hukum gas)\nSistem pembangkitan dan distribusi udara tekan\n\nD. Hydraulic System Components\n\nHydraulic pump (gear\, vane\, piston)\nHydraulic cylinder (single acting\, double acting)\nHydraulic motor\nControl valve (directional\, pressure\, flow control)\nReservoir\, filter\, cooler\, dan accumulator\nFungsi dan cara kerja masing-masing komponen\n\nE. Pneumatic System Components\n\nCompressor dan air treatment (FRL)\nPneumatic cylinder (single acting\, double acting)\nDirectional control valve\nFlow control valve dan check valve\nSelang\, fitting\, dan konektor\nFungsi dan aplikasi masing-masing komponen\n\nF. Symbols and Circuit Diagrams\n\nStandar simbol hidrolik dan pneumatik\nCara membaca diagram rangkaian\nAnalisis alur kerja dalam circuit\nLatihan interpretasi diagram sistem\n\nG. Practical Session – Hydraulic System\n\nPengenalan trainer kit / unit praktik\nPerakitan rangkaian hidrolik sederhana\nPengoperasian sistem hidrolik\nPengaturan tekanan dan aliran\nSimulasi kerja silinder dan aktuator\n\nH. Practical Session – Pneumatic System\n\nPerakitan rangkaian pneumatik dasar\nPengaturan tekanan udara\nPengoperasian silinder pneumatik\nSimulasi sistem kontrol pneumatik\nLatihan penggunaan valve dan actuator\n\nI. Safety in Hydraulic & Pneumatic Systems\n\nPotensi bahaya pada sistem hidrolik dan pneumatik\nProsedur kerja aman\nPenggunaan APD\nLock out – tag out (LOTO)\nBest practice keselamatan kerja\n\nJ. Troubleshooting & Problem Solving\n\nGejala umum kerusakan sistem hidrolik\nGejala umum kerusakan sistem pneumatik\nAnalisis penyebab kegagalan sistem\nMetode sistematis troubleshooting\nStudi kasus dan diskusi lapangan\n\nK. Maintenance & Best Practice\n\nPreventive maintenance sistem hidrolik\nPreventive maintenance sistem pneumatik\nPemeriksaan kebocoran dan kontaminasi\nPenggantian seal\, filter\, dan komponen aus\nTips meningkatkan umur pakai sistem\n\nL. Integration & Application in Industry\n\nIntegrasi hidrolik dan pneumatik dengan PLC\nAplikasi di mesin produksi\nStudi kasus industri\nDiskusi pengalaman peserta\n\nTraining ini dirancang seimbang antara teori dan praktik\, sehingga peserta tidak hanya “tahu”\, tetapi juga mampu mengerjakan di lapangan. Pendekatan praktis\, studi kasus\, dan simulasi akan membantu peserta meningkatkan kompetensi secara nyata dan siap diaplikasikan di lingkungan kerja. \n\n\nAbout The Course Leader:\nAdri Maldi Subardjah\, B.Eng. (Hons).\, M.Sc. And Team \nPublic Training berikutnya : 14 – 17 July\, 2026 | 13 – 16 Oktober\, 2026
URL:https://smart-training-center.com/event/hydraulic-pneumatic-practical-theory-troubleshooting-sistem-hidrolik-dan-pneumatik/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Electrical,Engineering,Instrument and control,Maintenance,Mechanical
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260427T083000
DTEND;TZID=Asia/Krasnoyarsk:20260429T160000
DTSTAMP:20260404T101525
CREATED:20241122T163252Z
LAST-MODIFIED:20260209T081450Z
UID:1035-1777278600-1777478400@smart-training-center.com
SUMMARY:Pemeriksaan & Pengujian Electrical Grounding system
DESCRIPTION:Background & About the Course\nThe inspection and testing of electrical grounding systems are vital for any building and its equipment. Neglecting the maintenance of grounding systems can lead to severe damage from lightning strikes\, resulting in equipment failure and even fires. In capital-intensive industries such as refineries\, oil and gas\, petrochemicals\, and tank yards\, lightning damage can lead to significant financial losses and production interruptions. \nAdditionally\, the risks to personnel\, including minor and serious injuries or fatalities\, medical costs\, and recovery expenses for the entire production system\, can be substantial. All these hazards and losses can be mitigated by enhancing the knowledge and skills of all involved through this training. \nCourse Objectives\nAfter completing this training\, participants will: \n\nGain a better understanding of lightning\, its symptoms\, characteristics\, and consequences for humans and industries.\nUnderstand the importance of grounding systems.\nLearn methods to avoid losses due to lightning strikes across various aspects.\nDiscover ways to prevent workplace accidents caused by lightning.\nAcquire knowledge on selecting lightning protection systems to safeguard equipment and personnel.\n\nWho Should Attend\nRecommended Participants: \n\nElectrical Engineers\, Supervisors\, and Superintendents\nPlant Maintenance Technicians\, Engineers\, Supervisors\, and Superintendents\nPlant and Process Engineers\, Supervisors\, and Superintendents\nSafety and Loss Prevention Engineers\, Supervisors\, and Superintendents\nElectrical and Mechanical Design Engineers\nAnyone looking to expand their knowledge of lightning protection and grounding systems\n\nCourse Outline\n\nCharacteristics of Lightning\nIntroduction to Lightning Protection Equipment\nIntroduction to Grounding Equipment\nMaintenance and Inspection of Grounding Systems\nMeasurement and Testing of Lightning Protection Systems\nPreventing Workplace Accidents\nAvoiding Industrial Equipment Damage\nPreventing Fires\nMitigating Other Losses\nRecommendations for Improving Existing Systems and Mitigation Strategies\n\nAbout the Course Leaders:\nIr. Nana Heryana\, S.T. IPU.\, ASEAN.Eng  \nPublic Training berikutnya : 10 – 12 Agustus\, 2026 | 15 – 17 Desember\, 2026
URL:https://smart-training-center.com/event/pemeriksaan-pengujian-electrical-grounding-system/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Engineering,Maintenance,Production Operation,Q-HSE
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/11/lightening-1.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260428T083000
DTEND;TZID=Asia/Krasnoyarsk:20260429T160000
DTSTAMP:20260404T101525
CREATED:20241122T170240Z
LAST-MODIFIED:20260208T002401Z
UID:1087-1777365000-1777478400@smart-training-center.com
SUMMARY:Fundamental Project Management
DESCRIPTION:About the Course:\nProject Management is the application of knowledge\, skills\, tools\, and techniques to meet project requirements and deliver successful outcomes. Project Management Fundamental provides a structured approach to planning\, executing\, and closing projects\, ensuring efficiency\, resource optimization\, and goal achievement. Effective project management is essential across industries\, from construction and engineering to IT and healthcare\, as it helps organizations stay competitive\, meet deadlines\, and manage risks. \nUnderstanding project management is crucial for professionals who lead or contribute to projects\, as it enhances their ability to manage time\, cost\, scope\, and quality while ensuring stakeholder satisfaction. It also fosters teamwork\, communication\, and problem-solving skills\, which are vital in today’s fast-paced and complex business environment. \nFor those looking to establish their expertise in this field\, the Project Management Professional (PMP) certification\, issued by the Project Management Institute (PMI)\, serves as a globally recognized credential. This certification validates an individual’s proficiency in managing projects effectively and increases career opportunities in project-based roles. This 3-day course serves as a structured preparation for individuals aspiring to take the PMP exam\, equipping them with fundamental project management principles aligned with PMI’s PMBOK Guide. \nCourse Objectives:\n\nUnderstand the fundamental principles of project management based on PMI standards.\nLearn project management processes\, knowledge areas\, and best practices.\nDevelop skills in project planning\, execution\, monitoring\, and closure.\nFamiliarize with PMP exam structure and key preparation strategies.\nEnhance problem-solving and decision-making skills for project environments.\n\nWho Should Attend:\n\nProject managers seeking PMP certification.\nTeam leads and supervisors involved in project execution.\nEngineers\, analysts\, and professionals managing projects.\nIndividuals aspiring to transition into project management roles.\nAnyone preparing for the PMP certification exam.\n\nCourse Content:\nIntroduction to Project Management & Framework \n\nScope\nOverview of project management and PMI’s PMBOK Guide.\nProject life cycle and process groups (Initiating\, Planning\, Executing\, Monitoring & Controlling\, Closing).\nKey project management terminologies and concepts.\nProject governance and organizational structures.\n\nProject Planning & Execution \n\nDeveloping a project management plan and defining project scope.\nWork Breakdown Structure (WBS) and project scheduling techniques (Gantt Chart\, CPM\, PERT).\nCost estimation\, budgeting\, and risk management strategies.\nStakeholder engagement and communication planning.\nQuality management and procurement planning.\n\nMonitoring\, Controlling & PMP Exam Preparation \n\nPerformance measurement techniques (Earned Value Management\, KPIs).\nChange management and issue resolution.\nClosing processes and lessons learned documentation.\nPMP exam format\, question types\, and test-taking strategies.\nMock exam and review session.\n\nAbout the Course Leader:\nDr. Ir. Djadja A. Sardjana\, MM \nSenior Executive on Strategic Planning/ Business Expansion/ Project/ Process/ Quality/ Knowledge Management/ Human Capital Learning\, Corporate University and Operation Management At AT&T/Lucent\, Ariawest/AT&T Wireless\, M-Web\, Motorola and Sampoerna Telekom \nManagement strategist with a 20+ year record of achievement and demonstrated business success in highly competitive markets. Have strength on driving growth of company revenues and improving business performance. Exceptional executive\, mentor and coach with capability to building company learning organization and knowledge management\, new business process\, securing customer loyalty\, and forging strong relationships with external business partners. \nPublic Training berikutnya : 28 – 29 Oktober\, 2026
URL:https://smart-training-center.com/event/fundamental-project-management/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Engineering,Maintenance,Manajemen,Production Operation,Project
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/11/Project-Documentation-Management-new-3.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260428T083000
DTEND;TZID=Asia/Krasnoyarsk:20260430T160000
DTSTAMP:20260404T101525
CREATED:20241122T102926Z
LAST-MODIFIED:20260208T001918Z
UID:915-1777365000-1777564800@smart-training-center.com
SUMMARY:Preventive and Predictive Maintenance
DESCRIPTION:Background & About the Course:\nMaintenance is no longer viewed as just a support function within production—it has evolved into a critical business strategy that directly impacts a company’s success. Effective maintenance plays a key role in achieving high availability systems by minimizing downtime and maximizing uptime. This shift underscores the importance of integrating preventive and predictive maintenance as part of long-term operational strategies. \nBy adopting predictive and preventive maintenance\, companies can enhance equipment reliability\, extend asset life\, and reduce operational disruptions. This course provides participants with the knowledge and tools necessary to design\, implement\, and optimize maintenance programs\, contributing to increased efficiency and long-term sustainability. \nCourse Objectives:\nAfter completing this training\, participants will be able to: \n\nUnderstand the fundamentals of maintenance management.\nImplement and manage predictive and preventive maintenance activities.\nDevelop and execute comprehensive maintenance programs.\nExtend maintenance intervals and reduce unplanned downtime.\nApply maintenance best practices to improve equipment reliability.\n\nWho Should Attend:\nThis course is designed for personnel involved in operations\, safety\, and maintenance\, including: \n\nTechnical\, Operations\, and Engineering Teams\nQA/QC and Inspection Staff\nMaintenance and Reliability Professionals\n\nCourse Content:\n1. Proactive Preventive Maintenance\n\nEquipment inspection and periodic assessments\nLubrication and component adjustments\nCleaning\, painting\, and protective coatings\nReplacing worn components to extend asset life\n\n2. Proactive Predictive Maintenance \n\nVibration analysis for early fault detection\nAirborne ultrasound for leak detection\nInfrared thermography for thermal assessments\nOil analysis to monitor equipment health\nNon-destructive testing (NDT) techniques\nRoot cause failure analysis (RCFA)\n\n3.Maintenance Planning & Scheduling \n\nPlanning and scheduling maintenance tasks\nImplementing streamlined RCM (Reliability-Centered Maintenance)\nSetting optimal maintenance intervals using reliability methods\nDeveloping quality maintenance procedures\nPerforming maintenance audits and tracking KPIs\nStudy Cases\n\nAbout the Course Leader:\nCecep Slamet Abadi\, ST.\, MT \nCecep Slamet Abadi\, ST.\, MT adalah salah satu associate instructor di FJM dengan latar belakang Pendidikan Teknik Mesin untuk jenjang S1 & S2. \nSelain aktif sebagai dosen sejak tahun 1996\, beliau juga memiliki pangalaman dalam bidang industry & konsultan di antaranya di LAPI ITB\, Puslitbang Air\, PINDAD\, Audit Energi di Pertamina EP Pangkalan Susu\, Tambung & Rengasdengklok\, serta sebagai team uji kompetensi si IATKI (Ikatan Akhli Ketenagalistrikan Indonesia). \nUntuk industrial training\, Pak Cecep telah mengajar lebih dari 150 in-house maupun public training di antaranya: Indonesia Power\, PLTA Saguling\, Freeport-Papua\, Chevron Oil/Gas\, Chevron Geothermal\, Premier Oil\, Pupuk Sriwijaya\, Pupuk Kujang\, Badak LNG\, dan lain-lain. \nPublic Training berikutnya : 21 – 23 September\, 2026 | 21 – 23 Desember\, 2026
URL:https://smart-training-center.com/event/preventive-predictive-maintenance/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Maintenance,Mechanical,Production Operation
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/11/Proactive-Maintenance.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260428T083000
DTEND;TZID=Asia/Krasnoyarsk:20260430T160000
DTSTAMP:20260404T101525
CREATED:20241122T160351Z
LAST-MODIFIED:20260209T082217Z
UID:968-1777365000-1777564800@smart-training-center.com
SUMMARY:Programmable Logic Controller (PLC) Principle\, Practice and Trouble Shooting
DESCRIPTION:Background & About the Course\nProgrammable Logic Controllers (PLCs) are essential components of modern industrial automation systems\, controlling machinery and processes across various sectors\, including manufacturing\, oil and gas\, automotive\, and food production. A PLC comprises hardware and software designed to automate processes that demand high reliability\, ease of programming\, and resilience to environmental factors. As industries increasingly depend on PLCs to enhance operational efficiency\, it is vital for engineers and technicians to understand their functionality\, troubleshoot effectively\, and optimize performance. This three-day training program offers a comprehensive overview of PLC principles\, practical applications\, and troubleshooting techniques to help professionals maintain and improve automation systems. \nCourse Objectives\n\nUnderstand the basic principles of PLCs\, including components\, functions\, and operations.\nProgram a PLC using ladder logic and other common programming languages.\nDevelop practical skills for configuring and implementing PLC systems in various automation environments.\nTroubleshoot and diagnose common PLC problems and faults.\nUtilize diagnostic tools and techniques to enhance system reliability and performance.\nOptimize PLC-controlled systems for increased operational efficiency.\nLearn about the latest advancements in PLC technology and their real-world applications.\n\nWho Should Attend\n\nMaintenance Engineers and Technicians\nAutomation Engineers\nControl System Engineers\nElectrical Engineers\nTechnicians and Operators\nProject Managers\n\nCourse Outline\nIntroduction to PLCs and Basic Programming \n\nIntroduction to PLCs\n\n\nOverview of PLC components (CPU\, I/O\, etc.)\nTypes of PLCs and their applications\nInstallation\, wiring\, and setup basics\n\n\nPLC Programming Languages\n\n\nIntroduction to Ladder Logic programming\nBasic syntax and functions in Ladder Logic\nHands-on: Creating simple ON/OFF programs\n\n\nPLC Communication and I/O\n\n\nDigital vs. analog I/O systems\nWorking with I/O modules\nHands-on: Configuring and wiring basic I/O\n\nAdvanced Programming\, Applications\, and Integration \n\nAdvanced Ladder Logic Programming\n\n\nUsing timers\, counters\, and memory management\nAdvanced programming techniques (sequencers\, shift registers)\nHands-on: Developing a complex program\n\n\nPLC Integration with Other Systems\n\n\nPLC and SCADA/HMI systems integration\nCommunication protocols (Modbus\, Profibus\, etc.)\nHands-on: Integration of PLC with SCADA or HMI\n\n\nPractical PLC Applications\n\n\nReal-world applications in manufacturing and process control\nPLC in motion control and robotics\nHands-on: Implementing a basic control system\n\nPLC Troubleshooting and Optimization \n\nCommon PLC Faults and Troubleshooting\n\n\nIdentifying common PLC faults (I/O\, power\, communication issues)\nTroubleshooting tools and diagnostic methods\nHands-on: Troubleshooting a PLC fault simulation\n\n\nPreventive Maintenance and Optimization\n\n\nBest practices for PLC preventive maintenance\nOptimizing PLC programs for reliability\nHands-on: Optimizing a PLC control system\n\n\nAdvanced Troubleshooting and Case Study\n\n\nAnalyzing a complex PLC failure scenario\nReview of troubleshooting steps and methods\nHands-on: Solving real-world PLC problems\n\nAbout the Course Leader:\nProf. Ir. Endra Joelianto\, Ph.D.\, SMIEEE is an expert in control engineering with extensive research in hybrid control systems\, discrete event control systems\, Petri nets analysis and application on PLCs\, robust PID controllers\, advanced process control\, and industrial automation using PLC/DCS. He earned his first degree (Ir.) in Engineering Physics in 1990 from the Department of Engineering Physics at ITB and his Doctor of Philosophy (PhD) in Control Engineering in 2001 from the Department of Engineering at The Australian National University\, Australia. \nPublic Training berikutnya : 24 – 26 Agustus\, 2026 | 7 – 9 September\, 2026
URL:https://smart-training-center.com/event/programmable-logic-controller-plc-principle-practice-trouble-shooting/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Electrical,Instrument and control,Maintenance
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/11/Programmable-Logic-Controller.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Krasnoyarsk:20260428T083000
DTEND;TZID=Asia/Krasnoyarsk:20260430T160000
DTSTAMP:20260404T101525
CREATED:20241122T160451Z
LAST-MODIFIED:20260208T003315Z
UID:988-1777365000-1777564800@smart-training-center.com
SUMMARY:Quality Control Mesin Saat Pemeliharaan dan Overhaul
DESCRIPTION:Background & About the Course:\nOverhaul mesin adalah salah satu proses kritikal dalam pemeliharaan peralatan industri yang bertujuan untuk memastikan mesin beroperasi dalam kondisi optimal. Dalam proses ini\, setiap komponen mesin diperiksa\, dibongkar\, dan diperbaiki atau diganti sesuai kebutuhan. Quality control (QC) dalam pemeliharaan mesin saat overhaul menjadi faktor kunci untuk mencegah kerusakan lebih lanjut\, meningkatkan efisiensi\, dan memperpanjang umur mesin. \nKursus ini dirancang untuk memberikan pemahaman mendalam mengenai penerapan quality control dalam setiap tahap proses overhaul. Peserta akan mempelajari metode dan teknik inspeksi\, standar kualitas yang relevan\, serta praktik terbaik dalam mendokumentasikan dan mengevaluasi hasil overhaul. Dengan demikian\, peserta akan mampu meningkatkan keandalan dan performa mesin secara keseluruhan. \nCourse Objectives:\n\nMemahami prinsip-prinsip quality control dalam pemeliharaan mesin saat overhaul\nMengidentifikasi dan mengimplementasikan prosedur inspeksi yang sesuai\nMenguasai teknik pengujian dan pengukuran komponen mesin\nMampu mengevaluasi dan menganalisis hasil inspeksi\nMenyusun laporan dan dokumentasi overhaul yang efektif\nMeningkatkan keandalan dan efisiensi operasional mesin\n\nWho Should Attend:\n\nTeknisi dan engineer pemeliharaan\nSupervisor dan manajer pemeliharaan\nQuality control dan quality assurance personnel\nPersonel yang terlibat dalam proses overhaul mesin\n\nCourse Content:\n\nPengantar Quality Control dalam Overhaul Mesin\n\nDefinisi dan peran QC dalam overhaul\nTujuan dan manfaat QC dalam pemeliharaan\n\n\nPerencanaan dan Persiapan Overhaul\n\nPenyusunan jadwal dan sumber daya\nIdentifikasi area kritikal untuk inspeksi\nPersiapan alat dan metode inspeksi\n\n\nProsedur Inspeksi dan Pengujian\n\nTeknik inspeksi visual dan non-destruktif\nPengukuran dan pengujian toleransi komponen\nEvaluasi kondisi komponen mesin\n\n\nPenerapan Standar dan Spesifikasi\n\nStandar internasional dan nasional terkait QC\nImplementasi standar dalam proses overhaul\n\n\nDokumentasi dan Pelaporan\n\nPembuatan checklist dan laporan inspeksi\nDokumentasi temuan dan rekomendasi perbaikan\n\n\nEvaluasi dan Analisis Hasil Overhaul\n\nAnalisis data hasil inspeksi\nIdentifikasi akar penyebab masalah\nLangkah-langkah perbaikan berkelanjutan\n\n\nStudi Kasus dan Diskusi\n\nAnalisis kasus nyata dalam overhaul mesin\nDiskusi kelompok dan solusi praktis\n\n\n\n\n\nABOUT THE COURSE LEADER:\nIr. Deddy Nugraha and Team  \nIr. Deddy Nugraha\, menyelesaikan pendidikan sarjana dari Departemen Teknik Mesin – Institut Teknologi Bandung\, yang kemudian mendalami bidang Power Plant (Gas Turbine\, Steam Turbine\, Pump & Compressor) khususnya di bidang Reliability\, Quality\, dan Maintenance Management. Berpengalaman sebagai Senior Propulsion Engineer di Universal Maintenance Center PT. IPTN (1991 – 2002) dan sekarang sebagai Reliability Engineer dan Professional Training Instructor. Pengalaman sebagai instruktur training adalah di PT. Tjiwi Kimia\, PT. Suparma\, PT. Indah Kiat Pulp & Paper\, PT. Indonesia Power\, British Petroleum\, PT. Pertamina\, PT. Krakatau Steel\, PT. Amoco Mitsui\, PT. Semen Gresik\, Indocement Tunggal Prakarsa\, PT. Puncak Jaya Power\, Medco Energy dsb. \nPublic Training berikutnya : 10 – 12 Agustus\, 2026 | 16 – 18 November\, 2026
URL:https://smart-training-center.com/event/quality-control-mesin-saat-pemeliharaan-dan-overhaul/
LOCATION:Bandung\, Jawa Barat\, Indonesia
CATEGORIES:Electrical,Engineering,Instrument and control,Maintenance,Mechanical,Production Operation
ATTACH;FMTTYPE=image/jpeg:https://smart-training-center.com/wp-content/uploads/2024/11/Quality-Control-Saat-Pemeliharaan-Mesin-Saat-Overhaul.jpg
ORGANIZER;CN="PT Fiqry Jaya Manunggal":MAILTO:info@fiqry.com
END:VEVENT
END:VCALENDAR